 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com GLORYFIELDS : 151EVMA051006A1 Date of Issue : October 06.2005 Classification : Issue No. New Changed PRODUCT SPECIFICATION FOR APPROVAL 3mm Square SMT Trimmer Potentiometers Product Part Number : EVM3ESX50B** Product Description : Country of Origin Applications : : JAPAN Standard Components for Generalized Electric Equipment *If you approve this specification, please fill in and sign the below and return 1 copy to us. Approval No : Approval Date : Excecuted by : (signature) Title Dept. : : Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. 401 Sadamasa-cho, Fukui City 910-8502 Japan Phone : +81-776-56-8034 Fax : +81-776-56-3114 Prepared by Signature : Engineering Section Contact Person : Name(Print) Title : Authorized by : Signature Name(Print) Title : Manager of Engineering 3rd Angle System Dimensions in mm (not to scale) 1 Part Numbering System EVM 3ES A B X50 C B13 D A:Product Code C:Packaging Spec. www..com B:Type and Construction D:Taper and Resistance 2 Appearance and Shape 2.1 Marking Nominal Total Resistance shall be marked by 2 digits. Please refer to table noted right side. 2.2 Dimensions in mm(not to scale) General Tolerance 0.3 Nominal Total Resistance Marking 100 ohm 12 1 k ohm 13 10 k ohm 14 1 M ohm 16 Recommended Land Pattern Circuit Diagram Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Drawing No. EVM3ESE00 Revisions 4 1 10 3rd Angle System Dimensions in mm (not to scale) 2.3 Constructions and Part List NO Parts Materials Base Alumina Resist. Metalgraze Stainless Steel Stainless Steel Solder UV Resin Tin Plating Tin,Silver, Copper Alloy Solder www..com Notes 1 Resistor Base 2 Brush 3 Terminal 4 5 Coating 3 Performance 3.1 Rating Item Power Rating Performance 0.15 W For potentiometers operated in ambient temperature above 70 deg.C , Power Rating shall be derated in accordance with the figure at right. Remarks Power Derating Curve Maximum Operating Voltage Voltage Rating Rated load (%) 50 V [DC] Ambient temperatur (deg.C) Voltage Rating should be Maximum Operating Voltage when E shall exceed Voltage Rating Maximum Operating Voltage. E= PxR -40 deg.C to 100 deg.C E:Voltage Rating(V) P:Power Rating(W) R:Nominal Total Resistance Operating Temperature Range Nominal Total Resistance Tolerancce of Total Resistance (ohm) 100 ohm to 1 M ohm 25 % Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Revisions Drawing No. EVM3ESE00 4 2 10 3rd Angle System Dimensions in mm (not to scale) 3.2 Characteristics 3.2.1 Electrical Characteristics Item Resistance Law Minimum Resistance Temperature Coefficients of Resistance Sliding Noise Performance 0B (Linear) Shall be below 2 % of Nominal Total Resistance. Shall be within -6 250 x10 /deg.C www..com Test Methods Conforming to JIS C 5260-1 4.9 Conforming to JIS C 5260-1 4.7 Conforming to JIS C 5260-1 2.2.19 Shall be below 5 % of Nominal Total Resistance. Vn / Is R x100 < 5 % Conformingto JIS C 5260-1 4.15 method B. Constant current power source Oscilloscorp or X-Y recorder Vn :Noise voltage Is Test current R :Nominal Total Resistance Except both terminations. Operating rate of actuator at meansurement 5 s/cycle to 15 s/cycle Test currrent R: Is 100xa / R(mA) a 10 100 1000 Noise voltage Nominal Total Resistance less than 10 k ohm more than 10 k ohm and less than 1 M ohm more than 1 M ohm Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Revisions Drawing No. 4 EVM3ESE00 3 10 3rd Angle System Dimensions in mm (not to scale) 3.2.2 Mechanical Characteristics Item Angle of Rotation Rotation Torque Adhesion Performance Electrically Effective Range 260 20 2 mN m to 20 mN m Test Methods Conforming to JIS C 5260-1 4.4.6 www..com Conforming to JIS C 5260-1 4.18 No damage on appearance, mechanical and electrical performance. After mounting SMD at recommended land pattern on the test printed wiring board. horizontal direction 10 N vertical direction 5 N Apply the pressure in two direction for each time 10 s as illustrated above. Resistance to Vibration V12 / V13 x 100 < 2 V13 :Input voltage (terminal 1-3 ) V12 :Output voltage (terminal 1-2 ) V12 : change of V12 Frequency range : 10 Hzto 55 Hz Peak to peak amplitud : 1.5 mm Sweeping : 5 min/cycle Test duration : 2 h in each directions(X,Y,Z) ( 6 h in total) : middle point Brush setting point Wave form Peak acceleration Duration of pulse Number of times Brush setting point : Half-sine pulse : 981 m/s 2 : 6 ms : 3 times in each directions(X,Y,Z) ( 18 times in total) : middle point Shock V12 / V13 x 100 < 2 V13 :Input voltage (terminal 1-3 ) V12 :Output voltage (terminal 1-2 ) V12 : change of V12 Resistance to Total resistance change shall Soldering Heat be within 2 % of initial value and no damage on apperance. Conforming to 4.1 Mounting Notes,Soldering Method(1). Number of times : 1 time Solderability New solder should be wet on the Reflow soldering should be done on the print electrode and be raised, and wet angle board for the test by the recommended land pattern. of the solder should be less than Solder paste :Sn-3.0Ag-0.5Cu(RMAtype) 90degree. Paste thickness :150 m Reflow conditions :Peak-temp. 250 deg.C maximum 230 deg.C or more time 30 s to 40 s Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Revisions Drawing No. EVM3ESE00 4 4 10 3rd Angle System Dimensions in mm (not to scale) 3.2.3 Environmental Characteristics Item Resistance to Cold Performance Total resistance change shall be within 5 % of initial value. Test Methods Test temperature Test duration Brush setting point : -40 deg.C 3 deg.C : 96 h 4 h : middle point www..com Resistance to Heat Total resistance change shall be within 5 % of initial value. Test temperature Test duration Brush setting point : 70 deg.C 2 deg.C : 500 h 12 h : middle point Change of Temperature Total resistance change shall be within 5 % of initial value. Low temperature :-40 deg.C 3 deg.C, 0 min 3 High temperature: 85 deg.C 2 deg.C, 0 min 3 Room temperature : 5 min Number of temperature change cycle : 50 cycle Brush setting point : middle point Resistance to Total resistance change shall be Damp,Heat within 5 % of initial value. Test temperature Relative humidity Test duration Brush setting point : 60 deg.C 2 deg.C : 90 %RH to 95 %RH : 500 h 12 h : middle point Endurance Total resistance change shall be (Under Damp , within 5 % of initial value. Load) Test temperature Relative humidity Test duration Load Loading method : 60 deg.C 2 deg.C : 90 %RH to 95 %RH : 500 h 12 h : Votage Rating : 1.5 h on and 0.5 h off (across terminations 1 and 3) Brush setting point Endurance Total resistance change shall be (Under Rated within 5 % of initial value. Load) Test temperature Test duration Load Loading method : middle point : 70 deg.C 2 deg.C : 500 h 12 h : Votage Rating : 1.5 h on and 0.5 h off (across terminations 1 and 3) Brush setting point Endurance (To Sliding) Total resistance change shall be within 15 % of initial value. : middle point Number of test revolution : 20 revolution Revolutional speed : 5 /min to10 /min One revolution means more than 90 % of the total electrical range. (without electrical load) 3mm Square Trimmer Potentiometers EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Drawing No. EVM3ESE00 Revisions 4 5 10 3rd Angle System Dimensions in mm (not to scale) www..com 4 Application Notes 4.1 Mounting Notes Reflow Soldering When reflow soldering, please observe below conditions. Reflow Soldering Profile (A)Heat-up zone 1 Room-temp. to preheat zone: 30 s to 60 s (B)Preheat zone 140 deg.C to 180 deg.C : 60 s to 120 s (C)Heat-up zone 2 Preheat zone to 230 deg.C : 20 s to 40 s (D)Melting-heat zone Peak-temp. : 5 s max Refer to the following (230 deg.C or more) graph. (E)Cooling zone 200 deg.C to 100 deg.C 1 deg.C/s to 4 deg.C/s Temp. (deg.C) Time(s) (deg.C) Peak Temp. Recommended condition (1)In case of reflow soldering,please measure actual temp. on the product surface and observe recommended condition described left. (2)In case of exceeding recommended condition, please consult with us before use. (3)The temp. strongly depends on measuring method of profile, please note how to do it. (4)In case that temp.changes by PWB size, mounting density and so on, please check them by each PWB. Time(s)(230 deg.C or more) Manual Soldering When manual soldering, please observe below condition. Soldering iron : 20 W maximum Soldering iron tip temperature : 280 deg.C maximum Soldering time : 3s maximum Soldering Notes This trimmer potentiometer is available for reflow soldering and manual (1) soldering only. Soldering Notes Solder and flux dissipated on the surface of element and contactor cause fatal damage, therefore in case of making wash and rinse, please consult before use. (2) (2)Design PCB When designing land pattern, please design it,in accordance with recommended land layout deseribed in this production specifications for information. (3)Mounting Notes Mounting top side pressure loaded on the trimmer potentiometer shall b N maximum. 4.9 Overload is afraid to cause fatal damage as transform or breakdown. After soldering ,solder ball or solder scrap may cause short between the land pattern,so please make enough insulation there. (4)Adjustment Notes Adjusting top side pressure loaded on the contactor shall be 4.9 N maximum. Overload is afraid to cause fatal damage as transform or breakdown of adjustment knob. In case that the moving contact is set near the border portion between electrically effective and non-effective range ,electrically non-effective and open range, be afraid to be deviation of setting value. So avoid the setting like this. (5)Lock paint Avoid applying any lockpaint otherwise intrusion or dissipation of the paint may cause contact dectect. In case of being subjected to apply it,please avoid using adhesives that may generate corrosive gas. part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Issue Drawing No. EVM3ESE00 Revisions 4 Panasonic Electronic Devices Co., Ltd. 6 10 3rd Angle System Dimensions in mm (not to scale) 4.2 Circuit Diagram Notes www..com (1)Power Rating The Maximum value of electric power which can continuously dissipated from all area of a resistive element at the rated ambient temperature. In general, rated power shall be registrated in accordance with size & kind of them. Please observe to use below rated power.Continuously dissipation is afraid to cause fatal damege, for example,deviation,firing,smoking. (2)Influence of ambient temperature Influence of ambient temperature can not be neglected for operating trim-pot in general case. Please comply with power derated curve,in case of using it under the condition of exceeding specified power rating. 4.3 Mounting Notes This trimmer potentiometer is not available for sealed type, so this is afraid to be influented fatally under the following conditions. (1)Corrosive gas atomosphere of Cl, H2S,NH3,N0X,S02 and so on. (2)Moisture atomosphere of waterdrop, dewdrop and so on. (3)Water,Salt,oil,chemicals,solvents and so on. (4)Atmosphere of direct solar radiation. 4.4 Storage Notes Storage under the following condition should be avoided. Be afraid to degrade some performances and soldering wettability. (1)Temperature:less than -10 deg.C and more than 40 deg.C, Relative humidity:more than 85 %. (2)Atmosphere of corrosive gas. (3)Long term storage of over 6 months after delivery. (4)Atmosphere of direct solar radiation. Please store the package without unsuitable load and stress. While remaining some product after opening the package, any countermeaure of shutting moisture gas and so on,should be done. 4.5 Application Notes for electric equipments and instruments Although enough care is taken to ensure trimmer potentiometer quality. As life-end breakage mode,some fatal trouble might generate,such as spec-out resistance change, short or open circuits, abnomally generated heat. So please review the affect of any single fault of a potentiometer in advance. (1)The product specification for information ensures the quality of pre-set potentiometers. For applying ,please should evaluate this product under the condition built in the appliances. (2)The troubles caused by applying this product under out-specification should not be warranbted. (3)When applying for high-excellent liabilty and security appliances,for example,traffic transportation equipments(train,auto vehicles,traffic-signal equipments),medical apparatus, aircraft, spacecraft,heating,firing,gas,rotating equipment,security equipment, atomic-power equipment, machine-tool,and so on. Please make enough considerations to design fail-safe circuit system for safety as followings. *To make a safety system by a protective circuit or a protective device. *To make a safety system by the redundant circuit so that the single fault of a trimmer potentiometer does not cause a dangerous situation. (4)In case of arising some questions on the safety of this product,please don't hesitate to contact with our company and further technical evaluation should be done. Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Drawing No. EVM3ESE00 Revisions 4 7 10 3rd Angle System Dimensions in mm (not to scale) 5 Operation of product specification for information www..com (1)Please return one set specification as approval one with accepted stamp or sign,after confirming and checking it . In case that it will not be returned,in spite of taking three months or more from issue date noted on the cover page of this specification. We could estimate that it has been already accepted, so please consider to operate it. (2)Changing the content of product of specification for information is to be performed after pre-coordination with customer. When you confirm revision of this specification, the previous version shall lose its validity. Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Drawing No. EVM3ESE00 Revisions 4 8 10 3rd Angle System Dimensions in mm (not to scale) 6 Packaging Methods www..com Part Name 3mm Square Trimmer Potentiometers Part No. EVM3ESX50B** Panasonic Electronic Devices Co., Ltd. Issue Drawing No. EVM3ESE00 Revisions 4 9 10 www..com Panasonic Electronic Devices Co., Ltd. |
Price & Availability of EVM3ESX50BXX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |